LED Drive Way Light Pack

• Complete kit supplied, containing; 2 Brick Lights, cables, transformer and plug. Everything needed to complete the job in one box. Stainless bezel with toughened frosted glass to diffuse the light.
  
• Suitable for use in walls, drives, paths, and steps. Uses energy-efficient low-voltage LED light.
  
• Dimension of lights: 165mm x 104mm x 65mm
  
• Drive-over LED Lights can be recessed into stone setts, brick or timber
  
• Easy to install – no electrician required Low voltage & safe to use – no heat generated 50,000 hours of LED life –
  
• Blue or White Water resistant (IP67) – suitable for outdoor use High quality stainless steel construction Ambient lighting – adds atmosphere & safety to the exterior of your home Complies with RoHS standard

Click here to buy….

Vivace Led Lights

LED cobble/block shaped lights for the Garden, driveway or pathway.

These products are polyester based to recreate the original stone forms used in parks, gardens and walk ways.

The most important aspect is that they look like ordinary driveway blocks during the day, but because of the LED that are contained within, they illuminate the walkways and paths during the dark. Installation of LED bricks,

These lights will need an LED Driver

Part No: LED16IP located in the accesories area

Available colours : White/Blue 

Technical Specifications: 1. Ambient operating temprature: +60°c -60°c 2.

Operating Voltage: 12V DC 20mA 3. 50.000 hours life running time 4.

Variations in the dimensions can be ±10%,

IP68 Rated (waterproof) Size 50 X 50 X 50mm 12Volt

Click Here to BUY….

Agile
LED cobble/block shaped lights for the Garden, driveway or pathway.

Click Here to Buy….

These products are polyester based to recreate the original stone forms used in parks, gardens and walk ways.

The most important aspect is that they look like ordinary driveway blocks during the day, but because of the LED that are contained within, they illuminate the walkways and paths during the dark. Installation of LED bricks,

These lights will need an LED Driver

Part No: LED16IP located in the accesories area

Available colours : White/Blue 

Technical Specifications: 1. Ambient operating temprature: +60°c -60°c 2.

Operating Voltage: 12V DC 20mA 3. 50.000 hours life running time 4.

Variations in the dimensions can be ±10%,

IP68 Rated (waterproof) Size 50 X 50 X 50mm 12Volt

Set of 4 Vivace LED Driveway Lights

LED brick/block shaped lights for the Garden, driveway or pathway.

These products are polyester based to recreate the original stone forms used in parks, gardens and walk ways.

The most important aspect is that they look like ordinary driveway blocks during the day, but because of the LED that are contained within, they illuminate the walkways and paths during the dark.

Installation of LED bricks,

These lights will need an LED Driver Part No: LED16IP located in the accesories area

Available colours in stock : White/Blue

Technical Specifications:

1. Ambient operating temprature: +60°c -60°c

2. Operating Voltage: 12V DC 20mA

3. 50.000 hours life running time

4. Variations in the dimensions can be ±10%, 5.

IP68 Rated

Size 195 X 95 X 55mm 12Volt LED

Click Here to buy….

LivingColors by Philips is a highly distinctive lamp which is a stunning addition to any office, bedroom or living room. Its beautifully tough transparent surround is flat on the bottom to ensure the lamp is stable when placed on any flat surface. It is powered from the mains with a translucent power cable (2.5m long) and together with the LivingColors power adaptor itreduces the voltage to just 5V.

Light Tape

Claimed by its American manufacturers - Electro-LuminX® Lighting Corporation - to be the brightest and longest electroluminescent lamp in the world,�
Light Tape has many uses, in many industries - architectural lighting, modern interiors and signage are just the obvious ones.�
Light Tape® is available in a range of standard colours, in widths from 0.25 inches (6mm) to 2 feet (600mm). Two versions are available, one for indoors, one for outside. We can also supply EL panels and custom cut shapes - so if you require something more complex than a simple strip of EL material, we can help.  

EASY TO INSTALL, COMES IN ROLLS! Light Tape® is flexible enough to wrap around corners, over uneven surfaces and areas previously unimaginable. Simply use Velcro or double sided tape for indoor installations. Or try our outdoor extrusions for exterior applications.�
OUTDOOR FRIENDLY We have engineered Light Tape® to work outside as well as inside. A logical replacement for traditional neon or other accent lighting. Quick, easy, do it yourself LOVES TO DANCE, FLASH IT, DIM IT! Unlike fiber optics, Light Tape® loves to be flashed. Flashing will not only enhance many applications but will significantly extend its life. Light Tape® offers multi-channel sequencers as well as flasher units. The voltage and frequency may be adjusted to vary the brightness as well as color hue. INCREDIBLE ENERGY SAVINGS A 1 inch Light Tape® lamp 300 feet long (91 m) would consume less power than a 100 watt light bulb. Light Tape® is the most energy efficient form of lighting. Typical energy consumption is only 0.25 ma / sq. in.�

THIN AS A CREDIT CARD Light Tape® is a thin as a business card (0.02 Inches thick) but flexible as tape. Flat and emits no heat, you can put it anywhere!�
EXTREMELY DURABLE, CUT IT WITH SCISSORS! Light Tape® does not contain glass, gas or have any filaments to break, it will not fail catastrophically. You can walk on it, bend it, cut it, twist it or hang it on the back of a bus. It’s tough to break!�
MODERN HIGH-TECH LOOK A very clean, crisp and modern look that is visible for miles with a laser like appearance. Utilize this cutting edge technology to differentiate or accent your products and illuminated applications.�
SAFE ALTERNATIVE, NO MORE GLASS! Light Tape® is a flat flexible plastic lamp that does not contain gasses, filaments, mercury or glass. It is extremely visibile through smoke yet does not produce a glare. Cool to touch and meets UL as well as other agency safety requirements. Contact us for further information.Click here formore info

Dynalite dimming systems A lighting control system gives you the power to transform a space to suit any mood. Almost any environment can be enhanced; residential, retail, galleries, museums, themed venues, lecture theatres, boardrooms, ballrooms and more. Our reputation in the field of architectural lighting control is second to none. From simple preset scenes to complex integration, Dynalite is the first choice for many of the world’s major hotel groups. Some of the world’s most iconic buildings and landmarks feature Dynalite systems. Smart House Solutions are Experienced designers and installers of Dynalite Lighting Control systems, for a cost effective and easy to use system.

Multiple rooms or even whole house lighting schemes can be integrated. With systems allowing the user to turn off the whole house with one button and the convenience of remote controls, it is possible to lie in bed and switch off all lights in the house with a simple remote control.

“Avenues” of light can be created for the night time, so a scene can be created that just lights the route from a bedroom to the kitchen for example. Integration with other home control systems mean that this “avenue” can be intelligently triggered by motion rather than requiring a switch and for this motion sensitivity only to be triggered at certain times of the day.

Security
Lighting can be integrated into security schemes with lighting mimicing an occupied house. Again this can be programmed to be more convincing than a simle timer operated system. With some systems it is possible to “record” normal occupancy and play that back when required.

We’d summarise the benefits of lighting controls systems as offering:

1. Ease of use
2. Quality feel
3. Convenience