Soundcast OutCast

Speakercast OutCast is an all weather outdoor speaker system designed to provide high performance full range music in the garden or patio. It features an 8” downward firing woofer, four 3” high frequency drivers in an omni-directional array, a 100 watt digital amplifier and the Soundcast receiver.

The OutCast is made of water resistant plastic and is designed to operate for up to 10 hours on the built-in, rechargeable battery pack. It has an internal AC power supply that can recharge the NiMH battery pack and operate the OutCast at the same time.

Packaged with the iCast transmitter the OutCast allows you to dock your iPod in the transmitter and listen to music anywhere in your garden up to 30 metres away - wirelessly!

Soundcast systems are not affected by interference from other 2.4GHz devices such as microwave ovens, cordless phones or 802.11 networks, and because Soundcast utilizes the analogue output signal of any digital storage device, all Soundcast products are compatible with all the currently accepted music file formats, including iTunes™.

The OutCast features pause/play and track forward/track back and volume controls for remote operation of the iPod. The OutCast iCast is truly “plug and play” with no software installation or lengthy set-up required. The OutCast also has controls for ‘mood lighting’ to operate the subdues lighting built into the unit. There is also an input jack for direct connection of an MP3 player, which should very useful during social gatherings when guests might wish to play music from their personal players.

The Soundcast iCast transmitter comes with approved, interchangeable inserts that accommodate different iPod models, including the Nano. Tracking and menu controls operate while the iPod is in the dock and transmitting music to the receiver, and the docking unit serves as a battery charger for the iPod.

Click Here to buy…. 

Soundcast

Finally! Listen to your iPod® or any MP3 player or music files of any kind through real audio equipment. No wires. No static. No interference. No Software… just plug-and-play.

Soundcast forms a wireless bridge between an audio source like an MP3 player and an audio sound system – no wires to run, no programming required – it’s the perfect solution to that installation issue that has you stumped.

Soundcast Systems has developed a line of products incorporating a unique 2.4GHz wireless audio technology. For years, wireless solutions and wireless speakers have been plagued with outside interference from other products using the crowded 2.4GHz band. The Soundcast engineering team has refined our wireless audio technology to the point where the microwave oven or the cordless phone will not affect the quality of musical listening experience anywhere in the home. No buzzes, no dropouts, no distortion – just pure clean sound!  

OutCast

OutCast is a wireless all-weather outdoor speaker system designed to provide high performance full-range music in the garden or patio. Place the OutCast in the garden and it will wirelessly connect to the included iCast or transmitter.   

Click Here To Buy…

iCast

Simply plug the iCast into a hi-fi System (via included phono cable) and the iCast receiver duplicates several key iPod functions to allow enjoyment of the iPod and operate remotely from the receiver location. Each iCast transmitter can control up to two iCast receivers, it’s possible to transmit audio to two different locations in the house with the purchase of a second iCast receiver.   

Click Here To Buy…

SpeakerCast

SpeakerCast is a wireless compact, amplified stereo speaker system incorporating two 76mm (3”) full range drivers, a 50 watt per channel digital amplifier, and the Soundcast receiver. Power is supplied by the internal AC power supply. SpeakerCast includes an iCast transmitter, and features pause/play and track forward/track back controls for remote operation of an iPod. Also included is an IR remote for on/off, volume up/down and mute control.   

Click Here To Buy…

AudioCast

Functions in exactly the same way as the iCast - without the iPod dock. Simply connect the Soundcast AudioCast to the line out of a computer, or any device with a line out, and transmit a high quality interference free audio signal to an hi-fi system (via AudioCast receiver).

Click Here To Buy…

 The iPort makes it easy for the entire family to use the Apple iPod™ to enjoy their digital music and digital photo collections throughout the entire home. The Sonance iPort provides quick docking and access to the iPod photo, iPod mini and 4th Generation iPod with Click Wheel. The included iPort connections wallplate allows the iPort to connect to and play through practically any local or whole-home audio system. The DC power supply (also included) charges the iPod while it is docked in the iPort.

Connecting the iPort dock to amplifiers

The Sonance iPort has two settings; the first allows it to be used as a source (fixed line level) input to a multiroom audio system, or the Keene in-wall stereo amplifier for a single room solution. The second setting allows a variable line level output as a source into a local power amp, the iPort is connected to an optional stereo line level volume control, eg QED WM21. For details of these installation and the wiring schematics, please refer to the PDF of the installation manual, which you can download from the bottom of this page, or call us for more information.

iPort variations

There are five versions of the in-wall iPort:

• IW1 - Charges iPod when docked. Unbalanced audio and video outptu via RJ45 connectors, when docked. Unbalanced audio output wall plate included. Unbalanced video wall plate kit optional. Power supply inlcuded.
• IW2 - As above with the addition of a built-in IR receiver. Remote control not included.
• IW3 - As for IW2 with the addition of balanced audio. This allows the iPort to be located up to 150m away from the audio output wall plate.
• IW4 - As for IW3 with the addition of a factory pre-mounted RS232 module for two way communication. This also allows display of the metadata on the control device, eg playlists track, artist, etc
• IW5 - As for IW4 with the addition of a pre-loaded balanced video. Video video wall plate included. This allows the iPort to be up to 75m from the video display.

Specification Sonance iPort

• Features
  • Polished ABS construction compliments iPod styling
  • Designed for easy docking/undocking of iPod
  • Connects to supplied Wallplate with Cat5 cable via 8-pin connectors. NB: Requires US style single gang backbox
  • Built-in IR emitters (IW2 and above) — can be used with IR receivers for extensive control of iPod (Play, Pause, Previous, Track/Fast-Rewind, Next Track/Fast-Forward, Mute, Next/Previous Chapter or Album, Next/Previous Playlist, Power Off/On, Repeat, Shuffle, Stop, Headphone Volume Up/Down)
  • Fixed 200mA audio output: Balanced (for up to 150m runs, ie multiroom arrangements), or Unbalanced (for local source installations)
  • Video output allows photos and slide shows stored in iPod photo players to be displayed on TVs and screens anywhere in a home entertainment system
  • 15-Volt Regulated DC Power Supply connects to iPort Wallplate and charges iPod
  • Paintable flange

• Specification
  • Frequency Response: 20Hz-20kHz (±0.25dB) @ 150m (500 ft) Cat 5e
  • THD+Noise: < 0.015%, 20Hz-20kHz @ 150m (500 ft) Cat 5e
  • Signal to Noise: > 90dB (A wtd.) @ 150m (500 ft) Cat 5e
  • Maximum signal input: 1.5V RMS
  • Power supply: 15V DC, 500mA, regulated
  • Dimensions iPort (W x H x D): 127mm x 173mm x 83mm. Wall plate requires US style single gang back box
  • Cutout Dimensions (W x H): 105mm x 152mm

Click Here to buy….

Soundcast iCast forms a wireless bridge between your iPod and an audio sound system – no wires to run, no programming required – it’s the perfect solution to that installation issue that has you stumped.

Each Soundcast system consists of a transmitter and receiver which link wirelessly, using their proprietary 2.4GHz technology to send audio information over distances of up 100m (20-30m through walls). Each Soundcast transmitter can operate up to two Soundcast receivers, allowing two audio zones to play the same audio source material.

Soundcast systems are not affected by interference from other 2.4GHz devices such as microwave ovens, cordless phones or 802.11 networks, and because Soundcast utilises the analogue output signal of any digital storage device, all Soundcast products are compatible with all the currently accepted music file formats, including iTunes™.

The Soundcast iCast is truly “plug and play” with no software installation or lengthy set-up required. A channel selector switch makes it possible for up to three Soundcast systems to play in the same area, each with different audio material, and with no interference between the systems. This makes Soundcast the ideal choice for apartment living!

The Soundcast iCast transmitter comes with approved, interchangeable inserts that accommodate different iPod models, including the Nano. Tracking and menu controls operate while the iPod is in the dock and transmitting music to the receiver, and the docking unit serves as a battery charger for the iPod.

The Soundcast iCast receiver duplicates the pause/play and track forward/track back iPod functions to allow you to operate your iPod remotely from another room in your home. All the needed cables and adapters to make hook-up easy are supplied with iCast.

How does it work when other wireless audio systems have problems?

The Challenge
The 2.4GHz ISM band is a worldwide license-free band, which allows any application running on it to operate anywhere in the world, with no location specific modifications required. Wireless technologies such as Bluetooth and 802.11b wireless LAN as well as interferers such as microwave ovens and cordless telephones provide a challenging environment to work in. Any wireless radio solution that intends to provide a stable and robust RF link must overcome this challenge.

The Solution: Soundcast G2
Spread Spectrum technology is the most effective method of achieving effective communication in the challenging 2.4GHz ISM band. There are two principle ways this can be done: Frequency Hopping Spread Spectrum (FHSS)—such as used by Bluetooth, and Direct Sequencing Spread Spectrum (DSSS)—such as used by 802.11b. Soundcast G2 transceivers use FHSS. Our modules co-exist with all 2.4 GHz devices, and, just as important, co-exist with additional Soundcast G2 systems. This allows as many as three Soundcast G2 systems to operate in close proximity to each other. By achieving this level of service, wireless audio can now be securely used in high density multi-unit dwellings.

The Soundcast G2 platform uses advanced error protection techniques to guarantee the quality of service required in streaming audio applications. Hardware forward error correction, adaptive frequency hopping, and dynamic hopping channel diversity are all built into the protocol of the system. The system also supports bi-directional communication for acknowledging and retransmission should packet loss occur.

Cilck Here to buy….

Soundcast iCast features

• Includes both iCast Receiver and iCast Transmitter
• Interference-Free 2.4 GHz system – not affected by microwave ovens, cordless phones or other wireless devices
• Receiver connects to amplified speakers or complete audio systems to play transmitted music files
• Includes inserts for iPod 3G, iPod mini, iPod 4G, iPod with colour display, iPod nano, iPod with video
• Range up to 100m (’Freespace’) - expect 20-30 metres through walls
• Receiver features Skip Forward/Back, Pause/Play controls
• Plug & Play - No software needed
• Works with all music formats and players including iTunes
• Includes AC Adapter and all connecting cables needed
• Dimensions: 85mm x 41mm x 35mm

Click Here to buy….

The Escient FP-1 provides all of the great on-screen music management features you expect from a FireBall for your iPod. It’s a complete FireBall Music Manager with all of the custom install features you need to provide seamless integration of iPod music into any home audio system.

The Escient FP-1 can also stream music from any Escient FireBall music server or PC/Mac with or without a docked iPod. The FP-1 even allows other Escient FireBalls to access and play music stored on the iPod including music purchased from the iTunes Music Store.

A remote handset is part of the Escient FP-1 kit, which lets you control the device from across the room, via a stand alone IR relay system�
Alternatively you can have command of your iPod via our learning remote controls, including the Philips Pronto or from your PC via the RS232 connection.

When used with the Russound CAV system, which distributes composite video to all screens around your house, the Escient FP-1 allows you to display the metadata menu structure from the iPod, listen to your music through full size speakers and watch videos and view photo albums on your screen of choice. If you use the FP-1 with a multiroom controller without video distribution, you will need a video modulator such as the Labgear MOD111 and a TV distribution amplifier to make the iPod menus and video output available on TVs throughout the house.

Specification Escient FP-1

 
• Connections
  • S-Video outputs: 1
  • Composite video outputs: 1
  • Analogue stereo audio outputs: 1
  • Optical digital audio outputs: 1
  • RS232 connection: 1
  • Ethernet connection: 1
  • IR input: 1
• USB connection
• General
  • Dimensions: 205.7mm x 129.5mm x 40.6mm (w x d x h)
  • Supported Audio Formats: PCM, MP3, FLAC, WMA, AAC
  • Included Accessories and Cables:
    • IR Remote
    • A/V cables
    • Ethernet cable
    • Power cord

Click Here to Buy…………..

Soundcast iCast forms a wireless bridge between your iPod and an audio sound system – no wires to run, no programming required – it’s the perfect solution to that installation issue that has you stumped.

Each Soundcast system consists of a transmitter and receiver which link wirelessly, using their proprietary 2.4GHz technology to send audio information over distances of up 100m (20-30m through walls). Each Soundcast transmitter can operate up to two Soundcast receivers, allowing two audio zones to play the same audio source material.

Soundcast systems are not affected by interference from other 2.4GHz devices such as microwave ovens, cordless phones or 802.11 networks, and because Soundcast utilises the analogue output signal of any digital storage device, all Soundcast products are compatible with all the currently accepted music file formats, including iTunes™.

The Soundcast iCast is truly “plug and play” with no software installation or lengthy set-up required. A channel selector switch makes it possible for up to three Soundcast systems to play in the same area, each with different audio material, and with no interference between the systems. This makes Soundcast the ideal choice for apartment living!

The Soundcast iCast transmitter comes with approved, interchangeable inserts that accommodate different iPod models, including the Nano. Tracking and menu controls operate while the iPod is in the dock and transmitting music to the receiver, and the docking unit serves as a battery charger for the iPod.

The Soundcast iCast receiver duplicates the pause/play and track forward/track back iPod functions to allow you to operate your iPod remotely from another room in your home. All the needed cables and adapters to make hook-up easy are supplied with iCast.

How does it work when other wireless audio systems have problems?

The Challenge
The 2.4GHz ISM band is a worldwide license-free band, which allows any application running on it to operate anywhere in the world, with no location specific modifications required. Wireless technologies such as Bluetooth and 802.11b wireless LAN as well as interferers such as microwave ovens and cordless telephones provide a challenging environment to work in. Any wireless radio solution that intends to provide a stable and robust RF link must overcome this challenge.

The Solution: Soundcast G2
Spread Spectrum technology is the most effective method of achieving effective communication in the challenging 2.4GHz ISM band. There are two principle ways this can be done: Frequency Hopping Spread Spectrum (FHSS)—such as used by Bluetooth, and Direct Sequencing Spread Spectrum (DSSS)—such as used by 802.11b. Soundcast G2 transceivers use FHSS. Our modules co-exist with all 2.4 GHz devices, and, just as important, co-exist with additional Soundcast G2 systems. This allows as many as three Soundcast G2 systems to operate in close proximity to each other. By achieving this level of service, wireless audio can now be securely used in high density multi-unit dwellings.

The Soundcast G2 platform uses advanced error protection techniques to guarantee the quality of service required in streaming audio applications. Hardware forward error correction, adaptive frequency hopping, and dynamic hopping channel diversity are all built into the protocol of the system. The system also supports bi-directional communication for acknowledging and retransmission should packet loss occur.

Soundcast iCast features

• Includes both iCast Receiver and iCast Transmitter
• Interference-Free 2.4 GHz system – not affected by microwave ovens, cordless phones or other wireless devices
• Receiver connects to amplified speakers or complete audio systems to play transmitted music files
• Includes inserts for iPod 3G, iPod mini, iPod 4G, iPod with colour display, iPod nano, iPod with video
• Range up to 100m (’Freespace’) - expect 20-30 metres through walls
• Receiver features Skip Forward/Back, Pause/Play controls
• Plug & Play - No software needed
• Works with all music formats and players including iTunes
• Includes AC Adapter and all connecting cables needed
• Dimensions: 85mm x 41mm x 35mm

Click here to buy….